DIN 7/16 MALE ELBOW CONNECTOR FOR 1/2"R CABLE

DIN 7/16 MALE ELBOW CONNECTOR FOR 1/2"R CABLE

DOWNLOAD DATASHEET

All dimensions are in mm; tolerances according to ISO 2768 m-H
Interface
According to IEC 61169-4, EN 122190, DIN 47223
Documents
Assembly instruction MA_1C7-C08
Material and plating
Connector parts Material Plating
Center contact (interface side) Spring bronze Silver, 3-6 µm
Center contact (cable side) Spring bronze Silver, 3-6 µm
Outer contact Brass Flash white bronze over silver(e.g. Optargen®)
Back nut Brass Flash white bronze over silver(e.g. Optargen®)
Dielectric PTFE&TPX&POM
Gasket Silicone&EPDM
Technical Data Sheet
7-16 RIGHT ANGLE PLUG
 (1/2’’S)
60S2C7-C08N1

Electrical data
Impedance 50 
Frequency DC to 8.3 GHz
Return loss  35 dB @ DC to 1 GHz
 30 dB @ 1 GHz to 3.8 GHz
 23 dB @ 3.8 GHz to 6 GHz
Insertion loss  0.05 dB
Insulation resistance  10 G
Center contact resistance  0.4 m
Outer contact resistance  1.5 m
Working voltage (at sea level) 500 V rms
Power handling (at 20 °C, sea level, VSWR 1.0) 1800 W @ 1 GHz
800 W @ 4 GHz
Intermodulation 3
rd order  160 dBc (2 x 43 dBm)
- Limitations are possible due to the used cable type -
Mechanical data
Mating cycles  500
Coupling nut retention  1000 N
Center contact captivation: axial  200 N
 radial  2 Ncm
Coupling torque(recommended) 25 to 30 Nm
Proof torque  35 Nm
Environmental data
Temperature range -45 °C to +85 °C
Rapid change of temperature DIN EN 122190, Sub-clause 4.6.7
Corrosion resistance DIN EN 122190, Sub-clause 4.6.10
Vibration DIN EN 122190, Sub-clause 4.6.3
Climatic category DIN EN 122190, Sub-clause 4.6.5 (45/85/21)
Damp heat DIN EN 122190 , Sub-clause 4.6.6
Degree of protection (mated pair) IEC 60529, IP68
2002/95/EC (RoHS) compliant
Tooling
Stripping tool 60W110-C08
Suitable cables
SL 012S Series (Recommend)
Packing
Standard 1 pce in bag
Weight 123 g/pce